ABB ACS850 series - Page 6

6 Quick Start-up Guide for ACS850 with Standard Control Program
Navigate to parameter group 99 Start-up data and
press SEL. Note that the list will wrap around in
either direction between groups 99 and 01 – it is
quicker to press for group 99.
Make sure parameter “9901 Language” is
highlighted and press EDIT.
Select the desired language and press SAVE.
Press EXIT twice to return to the Main menu.
Firmware assistants
The start-up procedures described below make use of firmware assistants. These are
routines that guide the user through the essential parameter settings.
1 – Application macro selection
In the Main menu, highlight ASSISTANTS and press
ENTER.
Highlight Firmware assistants and press SEL.
Highlight Application Macro and press OK.
99 Start-up data
01 Actual values
02 I/O values
03 Control values
04 Appl values
EXIT
SEL
PAR GROUPS 99LOC
9901 Language
English
9904 Motor type
9905 Motor ctrl mode
9906 Mot nom current
PARAMETERS
EXIT EDIT
LOC
9901 Language
Deutsch
PAR EDIT
CANCEL
SAVE
[0407 hex]
LOC
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER
MAIN MENU 1
LOC
Firmware assistants
Application assistant
EXIT
SEL
ASSISTANTS 1
LOC
Select assistant
Application Macro
Motor Set-up
EXIT
OK
CHOICE
LOC