20 Technical data
Markings of the drive/inverter module
An ATEX label is attached to the drive to signify compliance with the European ATEX
Products Directive 2014/34/EU (previously 94/9/EC).
No. Description
1 CE marking with Notified Body identification: The manufacturer declares that the product conforms with
ATEX Directive 2014/34/EU (previously 94/9/EC). Notified Body: Eurofins Expert Services (Formerly
VTT Expert Services, now part of the Eurofins Group).
2 Specific marking of explosion protection.
3 “II” = Product for other than mining applications.
4 “2” = Category 2 equipment. Parentheses indicate that the drive is to be installed outside the potentially
explosive atmosphere.
5 Certified for use in explosive atmospheres caused by:
“G” = gases, vapours or mists
“D” = dust.
6 Certificate reference.
To Next Page
Loading...
