ABB ACS880-01-430A-3+N5350 - Page 153

12-74 Startup Assistant & Parameters 3AXD50000011888
Table 12-4 Level 1 Parameter Block Definitions
Block Title
Parameter (Number)
Selection (Value)
Descriptions
ENERGY
EFFICIENCY
(Continued)
ENERGY TARIFF 1 (45.12) Default: 1.000 units
Range: 0.000 - 4294967.295 units
Denes energy tariff 1 (price of energy per kWh). Depending on the
setting of parameter 45.14 Tariff selection, either this value or 45.13
Energy tariff 2 is used for reference when monetary savings are
calculated.
The currency is dened by parameter 45.17 Tariff currency unit.
Note: Tariffs are read only at the instant of selection, and are not
applied retroactively.
ENERGY TARIFF 2 (45.13) Default: 2.000 units
Range: 0.000 - 4294967.295 units
Denes energy tariff 2 (price of energy per kWh).
See parameter 45.12 Energy tariff 1.
TARIFF SELECTION (45.14) Default: 0 (Energy tariff 1)
Range: 0 - 7, 10, 11, Other
Energy tariff 1
0
Energy tariff 2 1
2 (DI1) Digital input DI1 (10.02 DI delayed status, bit 0)
3 (DI2) Digital input DI2 (10.02 DI delayed status, bit 1)
4 (DI3) Digital input DI3 (10.02 DI delayed status, bit 2)
5 (DI4) Digital input DI4 (10.02 DI delayed status, bit 3)
6 (DI5) Digital input DI5 (10.02 DI delayed status, bit 4)
7 (DI6) Digital input DI6 (10.02 DI delayed status, bit 5)
10 (DIO1) Digital input/output DIO1 (11.02 DIO delayed status, bit 0)
11 (DIO2) Digital input/output DIO2 (11.02 DIO delayed status, bit 1)
Other [bit] Source selection (see Terms and abbreviations)
Selects (or denes a source that selects) which pre-dened energy
tariff is used.
0 = 45.12 Energy tariff 1
1 = 45.13 Energy tariff 2
TARIFF CURRENCY UNIT
(45.17)
Default: 101 (EUR)
Range: 100, 101, 102
100 (Local currency) Local currency
101 (EUR) Euro
102 (USD) US dollar
Species the currency used for the savings calculations.
CO2 CONVERSION FACTOR
(45.18)
Default: 0.500 tn/MWh
Range: 0.000 - 65.535 tn/MWh
Denes a factor for conversion of saved energy into CO
2
emissions
(kg/kWh or tn/MWh).