ABB ACS880-01-430A-3+N5350 - Page 161

12-82 Startup Assistant & Parameters 3AXD50000011888
Table 12-4 Level 1 Parameter Block Definitions
Block Title
Parameter (Number)
Selection (Value)
Descriptions
EMBEDDED
FIELDBUS
(Continued)
EFB ACT1 TYPE (58.29) Default: 3 (Torque)
Range: 0 - 6
0 (Auto)
Type/source and scaling follow the type of reference 2 selected by
parameter 58.27 EFB ref2 type. See the individual settings below for
the sources and scalings
1 (Transparent)
The value selected by parameter 58.32 EFB act2 transparent source is
sent as actual value 2. No scaling is applied (the 16-bit scaling is 1 = 1
unit).
2 (General)
The value selected by parameter 58.32 EFB act2 transparent source is
sent as actual value 2 with a 16-bit scaling of 100 = 1 unit (ie. integer
and two decimals).
3 (Torque)
01.10 Motor torque is sent as actual value 2. The scaling is dened by
parameter 46.03 Torque scaling.
4 (Speed)
01.01 Motor speed used is sent as actual value 1. The scaling is
dened by parameter 46.01 Speed scaling.
5 (Frequency)
01.01 Motor speed used is sent as actual value 2. The scaling is
dened by parameter 46.01 Speed scaling.
6 (Position)
Motor position is sent as actual value 2. See parameter 90.06 Motor
position scaled.
Selects the type/source and scaling of actual value 2 transmitted to the
eldbus network through the embedded eldbus interface.
EFB STATUS WORD
TRANSPARENT SOURCE
(58.30)
Default: 0 (Not selected)
Range: 0
0 (Not selected)
None
Other (-)
Source selection (see Terms and abbreviations
Selects the source of the status word when 58.25 Control prole is set
to Transparent.
EFB STATUS ACT1
TRANSPARENT SOURCE
(58.31)
Default: 0 (Not selected)
Range: 0
0 (Not selected)
None
Other (-)
Source selection (see Terms and abbreviations
Selects the source of actual value 1 when 58.28 EFB act1 type is set
to Transparent or General.
EFB STATUS ACT2
TRANSPARENT SOURCE
(58.32)
Default: 0 (Not selected)
Range: 0
0 (Not selected)
None
Other (-)
Source selection (see Terms and abbreviations
Selects the source of actual value 1 when 58.29 EFB act2 type is set
to Transparent or General.