Introduction to the supplement 11
Introduction to the
supplement
Contents of this chapter
This chapter describes the supplement.
Applicability
This supplement applies to the following flange mounting kits:
• ACS880-01 drive (frames R1 to R9)
• ACS880-11 and ACS880-31 drives (frames R3, R6, and R8)
• ACS580-01, ACH580-01 and ACQ580-01 drives (frames R0 to R9)
• ACH580-31 and ACQ580-31 drives (frames R3, R6 and R8).
Safety instructions
Obey the general safety instructions in the hardware manual and the task-specific
instructions in this supplement.
Target audience
This supplement is intended for people who plan the installation and install the drive
with the flange mounting kit. Read the supplement before you work on the drive. You
are expected to know the fundamentals of electricity, wiring, electrical components
and electrical schematic symbols.
The supplement is written for readers worldwide. Both SI and imperial units are
shown.
To Next Page
Loading...
