MOTORS FOR HEAVY ELECTRICAL VEHICLES
30
9.2.3. Stainless steel
• Name plate
• Rotor end plates (support plates)
• Connection flange (331)
9.2.4. Cast iron
• DE-shield (12)
9.2.5. Aluminium
• Stator frame (11)
• NDE-shield (13)
9.2.6. Copper
Copper is mostly integrated in the actual components and require some effort in order to be separated.
There are some special tools available to help separation but normally wedges, large hammers, gas
burners and manpower is used.
The following components are separated into one group for copper:
• Stator coils.
• Stator connection.
• Connectors (Ni-plated brass) (369,370, 371, 315)
9.2.7. Non metallic
• Parts in winding
• Parts in connection box
• Gamma seal (42)
• O-rings
• Cable insulation
To Next Page
Loading...
