166 AO2000 CONTINUOUS GAS ANALYZERS | OI/AO2000-EN REV. B
Softkeys
The following softkeys are displayed in the menu depending on which op-
tions exist for display or configuration of a particular component:
DELETE COMP.
The component can be deleted (see page 175).
CHANGE COMP.
The configuration of the component can be changed (see page 172).
NEW COMP.
A new component can be added (see page 168).
UNIT SELECTION
The physical unit used for the measured value display can be changed.
DETAIL
The detailed display, i.e. a separate window with a detailed list of the com-
ponent data, is opened (see below).
OVERVIEW
The detailed display is closed.
Detailed display
The following component data are listed in the detailed display:
Display
Name of the component in the measured value display, e.g. structure formula
Name
Full name of the component
Molar mass g/mol
Molar mass in g/mol
Response Factor
Detector reply related to propane for the respective component
Quantity of C-atoms
Number of C-atoms in the molecule of the component
Strip Factor
Ratio of the concentration of a component in the water to the concentration
of the same component in the gas flow after the strip event
Unit
The physical units used for readout values
To Next Page
Loading...
Need help?
General
