26 ABB Automation
1MRS751982-MUM
Protocol Editing Tool
CAP 505
3. Protocol Editing Tool
functionality
User’s Guide
Printing
An opened configuration can be sent to the printer with the “Print” command from
the File menu. After the print dialog opens, the user can choose the printer properties
and start printing.
In the view menu you define which signals to be shown in the table. Depending on
the settings here, you will have different printouts, since only the signals which are
shown in the table, are printed.
The following information is included in the printout:
• The date and time of printing.
• The date and time of last configuration modification.
• Protocol type.
• Relay type and its version.
• Object identification.
• The signals that are shown in the table.
To Next Page
Loading...