ABB CoriolisMaster FCB430 - Page 81

CoriolisMaster FCB400, FCH400 CORIOLIS MASS FLOWMETER | OI/FCB400/FCH400-EN REV. E 81
Process variable Short form Description HMI CO DO [f] DO [pulse]
Totalizer Qm Fwd ∑m+ Mass flow counter reading in the forward flow direction X — —
—
Totalizer Qm Rev ∑m- Mass flow counter reading in the reverse flow direction X — —
—
Totalizer Qm Diff ∑m Mass flow counter reading for forward flow / reverse flow difference X — —
—
Totalizer Qv Fwd ∑v+ Volume flow counter reading in forward flow direction X — —
—
Totalizer Qv Rev ∑v- Volume flow counter reading in reverse flow direction X — —
—
Totalizer Qv Diff ∑v Volume flow counter reading for forward flow / reverse flow difference X — —
—
Total. Net Qm Fwd* ∑M+ Net mass flow counter reading in forward flow direction X — — —
Total. Net Qm Rev* ∑M- Net mass flow counter reading in reverse flow direction. X — — —
Total. Net Qm Diff* ∑M Net mass flow counter reading for forward flow / reverse flow
difference.
X—— —
Total. Net Qv Fwd* ∑V+ Net volume flow counter reading in forward flow direction. X — — —
Total. Net Qv Rev* ∑V- Net volume flow counter reading in reverse flow direction. X — — —
Total. Net Qv Diff* ∑M Net volume flow counter reading for forward flow / reverse flow
difference.
X—— —
Total.Qv@Tref Fwd* ∑T+ Volume flow counter reading in forward flow direction at a reference
temperature.
X—— —
Total.Qv@Tref Rev* ∑T- Volume flow counter reading in reverse flow direction at a reference
temperature.
X—— —
Total.Qv@Tref Diff* ∑T Volume flow counter reading for forward flow / reverse flow difference
at a reference temperature.
X—— —
Totalizer Qm Sum ∑m+-S Absolute value from mass flow counter reading in the forward flow and
reverse flow direction. The counter cannot be stopped or reset.
X—— —
Totalizer Qv Sum ∑v+-S Absolute value from volume flow counter reading in the forward flow and
reverse flow direction. The counter cannot be stopped or reset.
X—— —
Total. Net Qm Sum ∑M+-S Absolute value from net mass flow counter reading in forward flow and
reverse flow direction. The counter cannot be stopped or reset.
X—— —
* Process variable is only available if the DensiMass function is activated.
** Process variable is only available if the FillMass function is activated.
X Parameter available
— Parameter not available