English
- 21 -
User manual DW
Cycle switchings setting menu
1
2
Parameters
modification
C2
C1
C2
C1
The “cycle switching” function (activated with the combination described on page 6) is a succession of on and off switching.
The cycle programme always starts from the on status. In this menu it’s possible to define the duration of on and off.
The duration of the on and off duration cannot be less than one minute.
Default on duration: 1minute, OFF duration: 1 minute
Parameters modification
1
Set the ON duration. It’s possible to set values between 1 minute and 99:59 hours.
2
Set the OFF duration. It’s possible to set values between 1 minute and 99:59 hours.
ON
OFF
To Next Page
Loading...
