Need help?Do you have a question about the ABB E1N 10 and is the answer not in the manual?
General| Rated Current (In) | 10A |
|---|---|
| Rated Current | 10 A |
| Poles | 3, 4 |
| Number of Poles | 3, 4 |
| Mounting Type | Fixed |
| Standards | IEC 60947-2 |
Specifies environmental and location criteria for installing the circuit breaker.
Provides steps for mounting the fixed circuit breaker to a surface.
Details the installation of the fixed part for withdrawable circuit-breaker types.
Describes connecting to the main power circuit, terminal shapes, and busbar examples.
How to connect auxiliary circuits and interfacing elements.
Overall checks and steps required before initial operation.
Identifies controls, indicators, and their functions on the front panel.
Step-by-step guide for manual and electrical operation of the circuit breaker.
Safety precautions to be observed before performing maintenance.
Detailed procedures for inspection and maintenance tasks.
Comprehensive details including electrical, environmental, and communication specs.
Detailed explanation of each protection function.
Specific troubleshooting steps for the PR121/P release.
Comprehensive details including electrical, environmental, and protection specs.
In-depth explanation of specific protection functions.
Specific troubleshooting steps for the PR122/P release.
Comprehensive details including electrical, environmental, and protection specs.
In-depth explanation of specific protection functions.
Specific troubleshooting steps for the PR123/P release.
Explanation of symbols and codes used in circuit diagrams.
To Next Page
