To Next PageTo Next Page
Need help?Do you have a question about the ABB Emax X1 UL and is the answer not in the manual?
General| Rated Voltage | Up to 690 V AC |
|---|---|
| Breaking Capacity | Up to 150 kA |
| Poles | 3P, 4P |
| Standards | UL 1066 |
| Type | Air Circuit Breaker |
| Mounting | Fixed, Withdrawable |
| Communication | Modbus, Profibus |
| Protection Functions | Overload, Short-circuit, Ground fault |
| Dimensions | Varies by configuration |
Provides overall dimensions for installation guidance.
Illustrates initial steps for mounting and connecting the device.
Details installation configurations for various product variants.
Describes the operating sequence including spring loading and states.
Procedure for disassembling the unit to install internal accessories.
Steps for installing internal accessories into the device.
Additional steps in the installation process of the device.
Diagrams for connecting the device to auxiliary circuits.
Provides terminal assignments and wiring tables for connections.
Illustrates wiring examples for fixed circuit breaker installations.
Procedure for connecting and disconnecting withdrawable circuit breakers.
Details on control buttons and their usage for operation.
Illustrates the different disconnected operating positions of the device.
Illustrates the test and connected operating positions of the device.
Instructions for removing the moving part from the fixed part.
Procedures for mounting the device on the floor.
Specific steps for installing the device using floor mounting.
Overall dimensional drawing of the main product.
Table detailing dimensions for standard configurations and variants.
Specific dimensional data for F-HR/VR and W-HR/VR variants.
Specifies torque values for secure connections.
Dimensional data for models supplied without a mounting flange.
