ABB HT841995 - User Manual

130 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operation Manual

Turbocharging

ABB Turbo Systems Ltd



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS 48D01 HT841995

n

Mmax

1035 t

Mmax

750

n

Bmax

983 t

Bmax

710

1/s °C

00180 8 50 50

Year 2013

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2410 English

TPS 48D01

Original Operation Manual

Table of Contents

Questions and Answers

T
Timothy RothSep 13, 2025
How to fix fouling of the compressor in ABB Battery Charger?
- M
  Michael MendezSep 13, 2025
  If the compressor of your ABB Battery Charger is fouling due to the feeding in of ventilation gases, it may be caused by heavy fouling of the compressor components, requiring you to clean the compressor. It may also be caused by increased vibrations or compressor blade damage, in which case you should correct the feed of ventilation gases according to instructions of enginebuilder.
M
Mary BrownSep 12, 2025
Why ABB Battery Charger has increase in speed?
- K
  Kimberly PetersonSep 12, 2025
  If your ABB Battery Charger has an increase in speed, it could be due to a heavily contaminated nozzle ring (with 4-stroke application). In this case, you should contact an ABB Turbocharging Service Station.
N
Nicole AndersenSep 12, 2025
What to do if measured speeds are too high in ABB Battery Charger?
- S
  Sean SmithSep 12, 2025
  If your ABB Battery Charger measured speeds are too high, the sensor tip may be contaminated. Dismantle the sensor, clean its tip, and refit the sensor using the specified tightening torque.
P
pgonzalesSep 10, 2025
Why ABB Battery Charger run-down time is too short?
- D
  danielwalkerSep 10, 2025
  If your ABB Battery Charger run-down time is too short, the turbocharger may be contaminated, requiring cleaning. Alternatively, there may be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.
P
Philip ScottSep 9, 2025
Why ABB Battery Charger makes noises during run-down?
- W
  wrightkarenSep 9, 2025
  If your ABB Battery Charger is experiencing noises during run-down, the turbocharger may be contaminated, requiring cleaning. Alternatively, there may be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.
R
Ronald SmallSep 8, 2025
What causes charge air pressure to be too high in ABB Battery Charger?
- L
  Laurie ScottSep 8, 2025
  If the charge air pressure of your ABB Battery Charger is too high, it could be due to a malfunctioning or poorly adjusted injection system. You should repair it or contact the manufacturer, or correct it.
M
morganlopezAug 23, 2025
Why is my ABB HT841995 vibrating?
- W
  whitebrendaAug 23, 2025
  If your ABB Industrial Equipment is experiencing vibrations, it could be due to a rotor unbalance, in which case you should contact an ABB Turbocharging Service Station. It may also be caused by a damaged turbine, compressor, or bearing.
D
Dennis McbrideSep 6, 2025
What to do if charge air pressure is too low in ABB Battery Charger?
- J
  James BrownSep 6, 2025
  If the charge air pressure of your ABB Battery Charger is too low, the air receiver may be leaking, requiring repairs. The injection system might be poorly adjusted, needing correction. A wrong reading on the manometer may also be the reason, in this case you should replace the manometer. A contaminated filter silencer causing excessive loss of pressure could also be responsible, and you should clean it.
B
burtonkyleSep 5, 2025
Why my ABB Battery Charger has vibrations?
- M
  Michael JonesSep 5, 2025
  If your ABB Battery Charger is experiencing vibrations, the rotor may be unbalanced. In this case, you should contact an ABB Turbocharging Service Station.
R
Robert JacksonSep 4, 2025
Why ABB Battery Charger has reduction in speed?
- J
  Jeffrey OdomSep 4, 2025
  If your ABB Battery Charger has a reduction in speed, one potential cause is defects of connected cylinders when pulse charging, in which case you should contact the enginebuilder. Another reason could be heavy contamination of the turbine, and you should clean it. Defects such as leaks in the exhaust gas pipes or charge air ducts could also be responsible, and you should make repairs.

ABB HT841995 Specifications

General

MPN	HT841995
Mounting	DIN rail
Protection Degree	IP20
Mechanical Life	20000 cycles
Electrical Life	10000 cycles
Operating Temperature	-25°C to +60°C

Related product manuals