Manual for Induction Motors and Generators
Transport and Unpacking - 7
3BFP 000 050 R0101 REV E
***Following figure for bearing type: Rolling bearing
Figure 2-1 Bearing plate for grease lubricated rolling bearings
1. Bearing type of D-end
2. Bearing type of ND-end
3. Lubrication interval
4. Quantity of grease for D-end bearing
5. Quantity of grease for ND-end bearing
6. Additional information
7. Type of grease delivered from factory
***Following figure for bearing type: Sleeve bearing
Figure 2-2 Bearing plate for sleeve bearings