Need help?Do you have a question about the ABB M1M 30 MODBUS and is the answer not in the manual?
General| Communication Protocol | Modbus RTU |
|---|---|
| Display Type | LCD |
| Accuracy | Class 1 |
| Measurement Type | Voltage, Current, Power, Energy |
| Current Input | 5 A |
| Operating Temperature | -25°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Mounting Type | DIN Rail Mount |
| Number of Phases | Three-Phase |
Essential safety precautions to prevent serious injury or death during operation.
Comprehensive technical specifications covering power, measurement accuracy, I/O, and environmental conditions.
Step-by-step instructions for physically mounting the power meter.
Electrical connection diagrams and guidelines for various network types.
Description of the four pushbuttons on the front panel and their operational functions.
Procedure for setting the initial 4-digit password to secure device configuration.
Configuration of network type and wiring (e.g., 3N3T, 3N2T) based on installation.
Setting the primary and secondary ratios for connected current transformers (CT).
Setting the primary and secondary ratios for connected voltage transformers (VT).
Configuration of alarm parameters: variable, phase, type, setpoint, delay, hysteresis, logging, and port.
Configuration of communication protocols (Modbus RTU, TCP/IP), including address, baud rate, IP, mask, and gateway.
To Next Page