ABB M1M 30 Series - Page 18

18
4
2
8
7
1
6
3
5
M1M 30 POWER METER USER MANUAL
Display content
Display is divided into 8 different areas, as shown in the figure below:
N Area Description
1 Title Title of the content displayed on each screen, including MENU, READ and CONF…
2 Phase
The corresponding phase of the measured value displayed, such as L1, L2, L3, L12
and L23…
3 Measurements Specific measured value
4 Magnitude/Unit
Magnitude includes E, K and M;
Unit includes V, A, W and WH…
5 Load type Inductive load and capacitive load
6 Additional info Additional info regarding the displayed page. Includes MAX, MIN, LOG...
7 Icons Indicating various types of state; and for further details, see the table below
8 RTC Real-time clock
Icon Description
Notification of alarm
Unread alarm notification
Correct phase sequence
Reverse phase sequence
Notification of error
Communication signals sent
Communication signals received
Historical data available
Configure parameters
Device locked, and parameters non-configurable
Device unlocked, and parameters configurable
Notification of warning