ABB M1M User Manual

M1M FIRMWARE UPDAT E
2/8
Table of Contents
1 Material and tools needed ......................................................................................................... 3
2 Initial settings on M1M device ................................................................................................... 3
2.1 M1M Modbus RTU (M4M 15 Modbus, M1M 20 Modbus, M1M 20 I/O,
M1M 30 Modbus, M1M 30 I/O) .................................................................................................. 3
2.2 M1M Ethernet (M1M 20 Ethernet, M1M 30 Ethernet) ......................................................... 4
3 Procedure via M1M FW update tool .......................................................................................... 5
3.1 Connection via Modbus RTU (M1M Modbus) ........................................................................5
3.2 Connection via Modbus TCP/IP (M1M Ethernet) ................................................................. 6
3.3 System update ........................................................................ Error! Bookmark not defined.
3.4 FW update ..................................................................................................................................... 7

ABB M1M Specifications

General

Mounting Type	DIN Rail
Display Type	LCD
Rated current	5 A
Frequency	50/60 Hz
Protection degree	IP20
Communication	Modbus RTU
Accuracy Class	Class 1
Current Input	5A
Voltage range	3x230/400V AC