To Next PageTo Next Page
Need help?Do you have a question about the ABB Cylon MATRIX-2 and is the answer not in the manual?
The Cylon® MATRIX-2 is a versatile controller designed for building automation systems, offering robust connectivity and intuitive operation. This device serves as a central component for managing various building functions, integrating seamlessly into existing networks.
The Cylon® MATRIX-2 acts as a core controller within a building management system, facilitating communication and control over a range of devices. It supports both Ethernet and RS-485 communication protocols, allowing for flexible integration with different types of equipment, including sensors and other network devices. The controller is designed to process data from connected sensors, execute programmed logic, and send commands to actuators, thereby automating environmental controls, lighting, and other building services. Its dual Ethernet ports enable network redundancy or the creation of separate network segments, enhancing system reliability and security. The RS-485 ports provide a means for connecting to legacy systems or devices that utilize this serial communication standard, ensuring broad compatibility. A dedicated service port (Micro USB) is included for local configuration and diagnostics, simplifying initial setup and troubleshooting. The device's ability to operate within a BACnet environment underscores its role in interoperable building automation, allowing it to communicate with a wide array of BACnet-compliant devices from various manufacturers.
The Cylon® MATRIX-2 is engineered for ease of use and flexible deployment. Its compact design allows for installation in various locations, while clear terminal markings simplify wiring. The device features indicator LEDs that provide immediate visual feedback on its operational status. A Red LED indicates power status, a Green LED signifies the unit's running state, and a Yellow LED is reserved for specific functions or error indications. These LEDs are crucial for quick diagnostics, allowing users to ascertain the controller's health at a glance.
Connectivity is a key strength of the MATRIX-2. It includes two Ethernet ports, which can be configured for different network topologies, such as connecting to a primary building network and a secondary network for specific subsystems. This dual-port capability enhances network resilience and allows for more complex network architectures. The two RS-485 ports are equipped with bus terminator switches, which can be easily toggled to enable or disable termination. This feature is vital for maintaining signal integrity in RS-485 networks, preventing reflections that can corrupt data. The switches are clearly marked with icons to indicate their status (in or out), making configuration straightforward.
For local interaction, the device includes a service port (Micro USB), which is invaluable for initial setup, firmware upgrades, and detailed diagnostics using a computer. This port allows technicians to connect directly to the controller without relying on network access, providing a reliable method for configuration and troubleshooting.
The MATRIX-2 also incorporates push buttons (SW1 and SW2) for essential system management tasks. These buttons offer a quick way to reset Ethernet settings or restore the device to factory defaults. For instance, pressing SW1 for a short duration resets only the Ethernet IP address, while a longer press of SW1 can restore all settings, including network configurations and user credentials, to their factory defaults. This feature is particularly useful in scenarios where network settings need to be quickly reconfigured or when a complete system reset is required. SW2 provides a mechanism to restart the device without altering any settings, which is useful for resolving minor operational glitches. The interaction with these buttons is accompanied by LED feedback (L2), which confirms the action being performed, ensuring that users are aware of the system's response.
Maintenance of the Cylon® MATRIX-2 is designed to be straightforward, minimizing downtime and simplifying troubleshooting. The indicator LEDs play a critical role in ongoing monitoring and initial diagnostics. A steady Red LED indicates power, while a blinking Green LED signifies normal operation. Any deviation from these patterns, such as a Red LED being off or a Green LED not blinking, immediately alerts maintenance personnel to a potential issue. The Yellow LED, though not always active, can provide specific error codes or status indications when relevant, further aiding in problem identification.
The push buttons (SW1 and SW2) are not only for initial setup but also serve as important maintenance tools. If network connectivity issues arise, the ability to quickly reset Ethernet settings via SW1 can resolve many common problems without requiring extensive network configuration knowledge. In cases of more severe software or configuration issues, the option to restore the device to factory defaults provides a clean slate, allowing for a fresh configuration. This can be a time-saving feature when troubleshooting complex problems or preparing the device for redeployment. The clear LED feedback (L2) associated with these button presses ensures that maintenance personnel can confirm the execution of these critical operations.
The service port (Micro USB) is another key maintenance feature. It allows for direct connection to a computer, providing a reliable channel for firmware updates, detailed diagnostics, and configuration adjustments using specialized software. This direct connection bypasses network dependencies, making it invaluable for troubleshooting network-related issues or performing updates in environments with restricted network access. The ability to update firmware ensures that the controller can benefit from the latest features, security patches, and performance improvements, extending its operational lifespan and maintaining optimal performance.
The robust design of the terminal connections, including screw terminals for power and RS-485, ensures secure and reliable wiring. This design minimizes the risk of loose connections, which can lead to intermittent operation or system failures. The clear labeling of each terminal further simplifies wiring and reduces the chance of errors during installation or maintenance. The inclusion of easily accessible bus terminator switches on the RS-485 ports simplifies network configuration and troubleshooting, allowing maintenance personnel to quickly adjust termination settings as needed to optimize network performance.
Overall, the Cylon® MATRIX-2 is designed with a strong emphasis on user-friendliness, robust connectivity, and simplified maintenance, making it a reliable and efficient choice for modern building automation systems.
General| Series | MATRIX |
|---|---|
| Digital Inputs | 8 |
| Digital Outputs | 8 |
| Analog Inputs | 4 |
| Analog Outputs | 4 |
| Enclosure Rating | IP20 |
| Weight | 0.5 kg |
| Communication Protocol | BACnet, Modbus |
| Supply Voltage | 24 V AC/DC |
| Humidity | 5% to 95% RH, non-condensing |
