Need help?Do you have a question about the ABB ACS580-01 +C135 Series and is the answer not in the manual?
General| Product Series | ACS580-01 +C135 |
|---|---|
| Category | Industrial Equipment |
| Control Type | Vector control |
| Frame Size | R1 to R9 |
| Dimensions | Varies by frame size |
| Weight | Varies by frame size |
| Power Range | 0.75 to 250 kW |
| Protection Class | IP21 |
| Communication | Modbus RTU |
| Ambient Temperature | -15 to +50 °C |
| EMC Filter | Built-in |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overtemperature |
| Cooling Method | Air Cooled |
Describes the content of this introductory chapter.
Specifies the drive models and kits this supplement applies to.
Identifies the intended readers for this installation supplement.
Explains the main goal of this document.
Lists other relevant manuals and resources for the product.
Introduces the components of the flange mounting kit.
Details how the drive is positioned during flange mounting.
Explains the IP ratings for different parts of the mounted drive.
Outlines specific installation needs based on frame size.
Provides part numbers for the flange mounting kit and related components.
Essential safety guidelines for mechanical installation of the drive.
Requirements for selecting a suitable installation location.
Specifies the necessary clearance around the drive for ventilation.
Notes specific considerations for mounting within cabinets.
Lists the tools required for mechanical installation.
Guidance on safely transporting the drive to the installation site.
Steps for safely unpacking and inspecting the drive and kit.
Lists all components included in the flange mounting kit.
Instructions for using the template to mark mounting holes.
Step-by-step guide for mounting the drive.
Additional procedures like installing grounding plates.
Instructions for installing the grounding plate for specific frames.
Steps for mounting the power cable grounding shelf.
Final steps for securing the drive onto the prepared plate.
Steps for safely unpacking and inspecting the drive and kit.
Lists all components included in the flange mounting kit.
Instructions for using the template to mark mounting holes.
Step-by-step guide for mounting the drive.
Final steps for securing the drive onto the prepared plate.
Critical safety warnings for lifting and handling larger drive frames.
Steps for safely unpacking and inspecting the drive and kit.
Lists all components included in the flange mounting kit.
Instructions for using the template to mark mounting holes.
Step-by-step guide for mounting the drive.
Final steps for securing the drive onto the prepared plate.
States that this chapter contains dimension drawings for kits and openings.
Provides detailed dimensional drawings for drive frame R1.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R2.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R3.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R4.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R5.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R6.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R7.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R8.
Shows precise locations and sizes for mounting holes.
Provides detailed dimensional drawings for drive frame R9.
Shows precise locations and sizes for mounting holes.
How to contact ABB for product or service questions.
Information on available ABB product training programs.
How to submit comments and feedback on the manual.
Where to find ABB manuals and documents online.
To Next Page
