Need help?Do you have a question about the ABB AFS670 and is the answer not in the manual?
General| Selling Unit of Measure | piece |
|---|---|
| Voltage Rating | 690 V |
| Communication Protocols | Modbus |
| Protection Class | IP20 |
| Order Multiple | 1 |
| Products Inside | 1 |
| Protection Functions | Overcurrent, overvoltage, undervoltage, short circuit, overtemperature |
| ABB Type Designation | AFS670 |
Ensures only authorized and trained personnel perform installation, commissioning, maintenance, and disposal.
Emphasizes proper configuration and reading safety documents before operating equipment.
Covers observing warning labels, maintaining safety facilities, and avoiding alterations.
Specifies operation within environmental limits and requirements for vertical mounting.
Warns of high voltage risks and electric shock from incorrect installation; do not touch live wires.
Ensures interconnection of circuits of the same category and assumes hazardous voltage presence.
Avoids liquids, conductive objects, and pointed items to prevent shock and fire.
Connect power according to the identification plate and avoid touching connectors.
Highlights the need for overvoltage protection for transmission interfaces, especially external connections.
Warns about earth currents in cable screens causing damage, fire, or injury.
Power up only after verified installation, correct mounting, and secured cables.
Switch off power before manipulation; assume hazardous voltage if power cannot be switched off.
Avoid working on equipment and connecting/disconnecting cables during lightning periods.
Ensures ventilation for battery enclosures and seals cable entries to prevent explosive gas build-up.
Install appropriate fuses/breakers for power supply circuits and ensure their integrity.
Switch off external power before connecting leads and ensure power cables provide insulation.
Ensures equipment stability in its location using proper mounting methods and rack stability.
To Next Page
