2
Document ID 1KHW029049
Document revision AFS670 System Release: all releases
Edition: A
Date: 2019-04-30
Copyright and confidentiality Copyright in this document vests in ABB Switzerland Ltd (hereinafter referred to
as ABB).
Manuals and software are protected by copyright. All rights reserved. The copy-
ing, reproduction, translation, conversion into any electronic medium or
machine scannable form is not permitted, either in whole or in part. The con-
tents of the manual may not be disclosed by the recipient to any third party,
without the prior written agreement of ABB.
An exception is the preparation of a backup copy of the software for your own
use. For devices with embedded software, the end-user license agreement on
the enclosed CD applies.
This document may not be used for any purposes except those specifically
authorized by contract or otherwise in writing by ABB.
Disclaimer ABB has taken reasonable care in compiling this document, however ABB
accepts no liability whatsoever for any error or omission in the information con-
tained herein and gives no other warranty or undertaking as to its accuracy.
ABB can accept no responsibility for damages, resulting from the use of the net-
work components or the associated operating software. In addition, we refer to
the conditions of use specified in the license contract.
ABB reserves the right to amend this document at any time without prior notice.
The product/software/firmware or the resulting overall solution are designed
for data processing and data transmission and may therefore be connected to
communication networks. It is your sole responsibility to provide and continu-
ously ensure a secure connection between the product/software/firmware or
the resulting overall solution and your network or any other networks (as the
case may be). You shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication
measures, encryption of data, installation of anti-virus programs, etc.) to pro-
tect the product/software/firmware or the resulting overall solution, the net-
work, its system and all the interfaces against any kind of security breaches,
unauthorized access, interference, intrusion, leakage and/or theft of data or
information. ABB and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference, intru-
sion, leakage and/or theft of data or information.
Although ABB provides functionality testing on the products including related
firmware and software that we release, you should institute your own testing
program for any product updates or other major system updates (to include but
not limited to firmware/software changes, configuration file changes, third
party software updates or patches, hardware exchanges, etc.) to ensure that
the security measures that you have implemented have not been compromised
and system functionality in your environment is as expected.
Copyright © 2019 ABB
To Next Page
Loading...
