What to do if my ABB A175-L35 has vibrations?
If your ABB Industrial Equipment is experiencing vibrations, there could be a few potential causes. One possibility is that the vibrations are originating from the engine itself; in this case, it's best to contact the engine builder. Alternatively, the rotor might be unbalanced, requiring you to contact an ABB Turbocharging Service Station.
Why is there a delayed start-up with my ABB A175-L35 Industrial Equipment?
A delayed start-up in your ABB Industrial Equipment can stem from a couple of issues. The turbocharger might be contaminated, in which case you should clean it periodically. Another potential cause is damaged bearings, which would necessitate contacting an ABB Turbocharging Service Station.
General| ABB Type Designation | A175-L35 |
|---|---|
| Rated Frequency (f) | 50 / 60 Hz |
| Order Multiple | 1 |
| Rated Operational Voltage | 24 V DC |
| Terminal Type | Screw Terminals |
| Standards | IEC 60947-5-1 |
To Next Page
