ABB A175-L35 - Fitting the Gas Inlet Casing, Nozzle Ring (A180-L and Larger)

Operation Manual / 4 Product description / A100-L
8
Disassembly and assembly
Page 80 /
113
© Copyright 2016 ABB. All rights reserved.
HZTL4034_EN
Revision H
November 2016
8.11 Fitting the gas inlet casing, nozzle ring (A180-L and
larger)
Fitting the nozzle ring
 Coat the screw threads with high-temperature grease.
Figure 47: Looping around the nozzle ring (A180-L and larger)
 Loop around the nozzle ring (56001) with lifting gear on the nozzle ring holder (90477) and
fix on the crane.