ABB MicroSCADA Pro SYS 600 - System Configuration and Development Tools

1MRS751852-MUM
SYS 600 *9.0
25
MicroSCADA Pro
System Overview
Technical Description
Picture_components
Fig. 3.6.1.-1 Picture components, except picture programs, are shown in the
picture.
3.7. Base tools
Base tools make it easier to use a MicroSCADA system. For example,
configurations can be made by using SCIL commands, but the system tools makes
the configuration procedure easier.
Tools are used for building, modifying and viewing system and application
components. They are used for the following tasks:
• Editing pictures and dialogs.
• SCIL programming.
• Managing application objects, for example viewing, modifying and creating
them.
• Testing application functionality.
• Creating, modifying and viewing system objects.
• Searching text strings from SCIL programs, pictures and text files.
The tools can be divided into the following groups:
• User interface tools
• Application tools
• System tools
• Accessory tools
These groups are described with more details in the following sections. The tools
can be opened from the Tool Manager (see Figure 3.7.1) where different tools are
found on different tool pages.