MANUAL MOTOR STARTER GUIDE
APRIL 19 47/80
Under the interface “Motor protection” the following filters are available:
− type of protection device
− rated voltage
− short-circuit current
− starter type
− coordination type
− overload relay
− motor rated power
For example: if you are looking for products for motor protection where a manual motor starter is used as a short-
circuit protection device, in a plant where the rated voltage is 400Vac and the IE3 Motor Rated Power is 2.2kW:
Figure 27: Screenshot from a example on SOC
SOC shows the right protection device for the selected application depending on the coordination type. Click on >>
to see the complete table
Figure 28: Screenshot from a example on SOC
To Next Page
Loading...
