04-3788_ABB_OPM_PVA11 6-10kVA-RT_EN_140423 Page 21/37 ABB
Modifications reserved
3 OPERATION
This chapter describes how to operate the UPS through the LCD display.
WARNING!
ONLY PERSONS WHICH HAVE BEEN TRAINED BY SERVICE
TECHNICIANS OF THE SUPPLIER OR HIS AUTHORIZED SERVICE
PARTNERS ARE ALLOWED TO OPERATE THE CONTROL PANEL OF
THE UPS.
ALL OTHER INTERVENTIONS ON THE UPS SYSTEM HAVE TO BE
DONE ONLY BY SERVICE TECHNICIANS OF THE SUPPLIER.
The only user permitted operations are:
· Operate the LCD display
· Start up and shut down of the UPS of the user field (excluding the commissioning start up)
· Operation of additional SNMP adapters and their software
3.1 Control Panel
The user-friendly control panel is composed of two parts:
· Selection Keys
· Power Management LCD Display (PMD)
Figure 29: Control Panel
3.1.1 Selection Keys
The
Button
Function Illustration
Power On/Off Turn on and off the UPS or change operating-mode.
Scroll up Enter/Exit the menus and scroll across the screens.
Scroll down Scroll down the menu
Select / Edit Select and confirm settings.
To Next Page
Loading...
