POWERVALUE 11 RT G2
STATUS
Approved
SECURITY LEVEL
Public
DOCUMENT ID.
4NWD005580
REV.
1
LANG.
EN
PAGE
3/12
© Copyright [Year of first publication] ABB. All rights reserved.
1. Important safety instructions
THIS CHAPTER CONTAINS IMPORTANT SAFETY INSTRUCTIONS. READ IT CAREFULLY
BEFORE STARTING DISASSEMBLING THE UNIT.
1.1. Symbols and warnings
The following symbols are used in this manual, the list below explains each symbol.
THIS SYMBOL IN CONJUNCTION WITH THE SIGNAL WORD “DANGER” INDICATES AN
IMMINENT ELECTRICAL HAZARD.
FAILURE TO OBSERVE THE RELATED SAFETY NOTE MAY CAUSE INJURY, DEATH OR
EQUIPMENT DAMAGE.
THIS SYMBOL IN CONJUNCTION WITH THE SIGNAL WORD “WARNING” INDICATES A
POTENTIALLY DANGEROUS SITUATION.
FAILURE TO OBSERVE MAY CAUSE INJURY, DEATH OR EQUIPMENT DAMAGE.
THIS SYMBOL INDICATES A HEAVY WEIGHT OBJECT THAT CAN CAUSE INJURY IN CASE OF
FALLING.
THIS SYMBOL INDICATES SHARP EDGES THAT MAY CAUSE INJURING FROM CUTTING.
DO NOT DISPOSE OF WITH ORDINARY TRASH.
THIS SYMBOL INDICATES USE OF GENERIC BUTTON-LIKE BATTERY, REQUIRING
SELECTIVE DISPOSAL.
To Next Page
Loading...
