ABB PSTX Series Installation And Commissioning Manual

This is the Installation and commissioning manual for Softs-
tarters Type PSTX30…PSTX1250.
Document number: 1SFC132081M0201
Revision: L
Issue date: 2018-07-06
Data can be changed without notice.
We reserve all rights to this document, even in the event that
a patent is issued and a different commercial proprietary right
is registered. Improper use, in particular reproduction and dis-
semination to third parties, is not permitted.
This document is written carefully. If you find an error, please
notify us as soon as possible.
The data contained in this manual is intended solely for the
product description and is not to be deemed to be a state-
ment of guaranteed properties. In the interests of our cus-
tomers, we constantly seek to ensure that our products are
developed to the latest technological
Author’s address:
ABB AB
Control Products
SE-721 61 VÄSTERÅS, Sweden
www.abb.com/lowvoltage
© Copyright 2018. All rights reserved. Data can be changed
without notice.
Original instruction

ABB PSTX Series Specifications

General

Type	Softstarter
Rated operational voltage	208-690 V AC
Rated operational current	30-1250 A
Number of phases	3
Operating temperature	-25 to +60°C
Operating frequency	50/60 Hz
Overload protection	Yes
Protection class	IP20
Communication protocols	Modbus RTU, Profibus
Starting method	Voltage ramp, current limit
Stopping method	soft stop
Bypass contactor	Built-in
Display	graphical display
Rated control supply voltage	100-240V AC