20 Description | Installation and commissioning manual | 1SFC132081M0201
3.1.5 Softstarter overview
Change the settings through Keypad and Fieldbus
communication.
Use the keypad to change settings for each parameter
alone or as a selection of default parameters for different
applications.
Most parameters have one possible setting, but some
parameters have extra settings for sequence start. The
default parameter settings are stored in the unit for a
reset to default.
When the fieldbus communication is selected, most
parameters can also be changed from this interface.
Overview, See Figure 3.1.
Figure 3.1
Softstarter overview
Ready
Run Fault
Protection
Com1 Com2
4T22T1 6T3
3L21L1 5L3
PSTX
L
100-250V
50/60 Hz K4 K5 K6
Start Stop In1 In2 DGND +24VGND
N
In0
1SFC132081M0201
Symbol for
Torque control
Anybus
connection
(Com1)
Supply voltage Us
Order code
Technical data
according to UL 508
Fieldbus plug adapter
connection (Com2)
Motor side connection
Terminal marking of
control circuits
Line side connection
Screen
Keypad
Mini USB
Country of origin
Utilization code
Approvals
Terminal marking of
control circuits
Protection (Yellow)
Fault (Red)
Technical data
according to
IEC 60 947-4-2
Ready (Green)
Run (Green)
3
To Next Page
Loading...
