4 - Operations
LED BEHAVIOR
LEDs Status Operational Status Remarks
1 green:
yellow:
red:
Inverter is not operating Input voltage less than 50Vdc at
the input
2 green:
yellow:
red:
Inverter is initializing, loading
settings and performing grid
check
Transition status while operating
conditions are checked
3 green:
yellow:
red:
Inverter is powering the grid Normal operation
4 green:
yellow:
red:
Inverter is shut down because of
a GFI fault
Ground fault has been detected
5 green:
yellow:
red:
Inverter detected a fault The fault can be inside or outside
the inverter. See the alarm code
appearing on the LCD
6 green:
yellow:
red:
Installation phase: inverter is
disconnected from grid
During installation it refers to
setup of the address for RS-485
communication
7 green:
yellow:
red:
Inverter is disconnected from grid Indicates a missing grid
connection
LED off LED on LED flashing any condition
To Next Page
Loading...
