Need help?Do you have a question about the ABB PVI-3.0/3.6/4.2-TL-OUTD and is the answer not in the manual?
General| Model | PVI-3.0/3.6/4.2-TL-OUTD |
|---|---|
| Manufacturer | ABB |
| Number of MPPT | 2 |
| Number of MPP Trackers | 2 |
| Operating Temperature Range | -25 °C to +60 °C |
| Protection Degree | IP65 |
| AC Voltage | 230 V |
| Frequency | 50/60 Hz |
| Topology | Transformerless |
| Cooling | Natural convection |
| Rated Power | 3000/3600/4200 W |
| Max. AC Power | 3000/3600/4200 W |
Details warranty terms and conditions for correct operation and installation.
Specifies required qualifications and prerequisites for personnel.
Explains safety symbols, labels, and icons used in the manual.
Defines the intended use, limitations, and prohibited uses of the equipment.
Overview of the different inverter models and their power outputs.
Information on equipment identification labels and their meaning.
Comprehensive technical specifications, input/output data, and protection details.
Specifies required torque values for various components during installation.
Graphs illustrating inverter efficiency performance under different conditions.
Explains how output power is reduced under specific environmental or operational conditions.
Details the equipment's function, components, and operating principles.
Guidance on system sizing and connecting multiple inverters.
Essential safety guidelines, instructions, and manufacturer liability.
Identifies hazardous environments, operations, and related risks.
Details thermal risks, PPE requirements, and staff safety during operations.
Lists residual risks and suggests remedies to prevent them.
Guidelines for safe transport, handling, lifting, and unpacking of the equipment.
Inventory of components and information on equipment weight for handling.
Checks for installation environment, including altitude and site conditions.
Recommendations for optimal placement, verticality, minimum distances, and mounting.
Steps before connecting PV generator: polarity, leakage checks, and protection.
Guidance on configuring input channels: independent, parallel, and examples.
Detailed procedure for connecting the DC side of the PV generator to the inverter.
Procedure for connecting the inverter's AC output to the grid, including cable sizing.
Details on connecting communication interfaces like RS485 and control board.
Explanation of the inverter's control keys, display, and LED status indicators.
Step-by-step guide for initial setup, country selection, and inverter commissioning.
How to access menus, adjust parameters, and configure settings via the display.
Explanation of LED behavior, status codes, and available operating data.
Accessing and understanding historical operating data, energy production, and savings.
Overview of configurable parameters like address, display, nation, and Vstart.
Instructions for running grid compliance tests according to standard CEI 0-21.
Recommended periodic maintenance tasks: visual inspection, operations, and cleaning.
Guidance on identifying and resolving error and warning messages displayed by the inverter.
Explanation of messages indicating output power limitations due to various factors.
To Next Page