- 36 -
000404BG
4 - Lifting and transport
List of components supplied
Supplied with the inverter are all the components required to correctly
install and connect the inverter
Components available for all models Qty
Bracket for wall fastening 1
Safety bar 1
Screw to lock safety bar 3
Plugs and screws for wall mounting 4 + 4
D.18 washer 4
M25 Cable Gland 1
M20 Cable Gland 1
Two-hole gasket for M20 signal cable glands and cap 1 + 1
Jumpers for conguration of the parallel input chan-
nels
1 + 1
Connector for connecting the communication and
control signals
2
In addition to what is explained in this guide, the safety and installation information provided in the installation manual must be read and followed.
The technical documentation and the interface and management software for the product are available at the website.
XXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXX
ABB solar inverters
Technical documentation 1
Скачано с сайта интернет магазина https://axiomplus.com.ua/
To Next Page
Loading...
