Need help?Do you have a question about the ABB PVS980-58 and is the answer not in the manual?
General| Product Type | Central Inverter |
|---|---|
| Frequency Range | 50/60 Hz |
| IP Protection Class | IP54 |
| Maximum DC Voltage | 1500 V |
| Maximum Efficiency | 98.8% |
| Cooling Type | Liquid Cooling |
| Dimensions | 2400 mm x 1200 mm x 2200 mm |
| Cooling Method | Liquid Cooled |
Describes manual contents, applicability, safety instructions, target audience, related documents, terms, and abbreviations.
Lists other relevant manuals and guides for the inverter and its options.
Defines technical terms and abbreviations used throughout the manual.
Describes the PVS980-58 as a central inverter converting solar power to the electrical grid.
Explains the inverter's machine states: Standby, Initialize, Disconnected, Connecting, MPPT, and Disconnecting.
Details how to start, stop, and perform transfer trip functions for the inverter operation.
Describes local control via control panel and remote control via fieldbus interfaces.
Explains setting up preset grid codes and customizing them for country-specific grid requirements.
Covers inverter monitoring of grid frequency and voltages against limits, and disconnection if unstable.
Allows injecting capacitive or inductive current to support grid voltage during peaks or dips.
Explains how the inverter generates reactive power to the grid using various reference types and curves.
Covers external active power limits, flat-top limits, and limitations after grid connection/faults.
Manages inverter temperatures through measurements, warnings, and faults.
Monitors insulation resistance and grounding for safety and grid connection.
Provides overview of inverter operating states, state machines, and status words.
Covers configuration of digital and analog inputs/outputs for customer interface.
Explains setting up a master passcode for cybersecurity and preventing unauthorized changes.
Provides an overview of all parameter groups, their contents, and corresponding page numbers.
Lists all parameters with their number, name, description, and default/fieldbus equivalent values.
Lists fault, warning, and event messages with causes and corrective actions.
Lists fault messages with codes, causes, and recommended actions.
Lists warning messages that may limit output power but do not stop the inverter.
Indicates abnormal conditions like tripping events due to grid disturbances.
Describes inverter control by external devices via communication or fieldbus networks.
Explains connecting the inverter to networks using communication adapter modules.
Details the steps for configuring the inverter for fieldbus control.
Standalone tool for updating inverter firmware.
Basic startup and maintenance tool for adjusting and monitoring parameters.
Enhanced version with network support for multiple inverters and fast monitoring.
Describes uploading PSL2 data logger files from drive flash memory to PC.
Explains how to open and view uploaded PSL2 data logger files.
Lists PSL2 triggered faults, their causes, and necessary actions.
To Next Page