142 Parameters
b15: Spare RO3
205.04 PLC watchdog write Shows the value that PLC reads and copies from the
“PLC watchdog read” parameter.
This parameter is read-only.
-/ Real
0...65535 1 = 1
205.05 PLC diagnostics counter Defines PLC diagnostics counter. 0/ Real
0...1024 1 = 1
205.06 PLC watchdog
threshold
Defines PLC link watchdog threshold level. 1500 ms/
Real
1...10000 ms Threshold level 1 = 1 ms
205.07 PLC CPU reboot Defines the state 1 to reboot PLC. -/ Real
0...65535 1 = 1
205.08 PLC error
acknowledgement
Defines the value for acknowledging PLC error.
Value 1 indicates that an error in the PLC is
acknowledged.
-/ Real
0...65535 1 = 1
205.09 PLC configuration code Defines PLC configuration code. -/ Real
0...255 1 = 1
206 System
configurator
System configuration.
206.01 Power section status Shows the status of power sections.
Enabled – power section is active.
Disabled – power section is not active or does not exist
in the current configuration.
- / Bit list
b0: Section 1 Power section 1 status.
b1: Section 2 Power section 2 status.
b2: Section 3 Power section 3 status.
b3: Section 4 Power section 4 status.
b4 … b15 Reserved
206.02 Power section 1 forced
disable
Disables power section 1. Inactive/ List
Inactive Power section 1 is not active. 0
Active Power section 1 is activated. 1
206.03 Power section 2 forced
disable
Disables power section 2. Inactive/ List
Inactive Power section 2 is not active. 0
Active Power section 2 is activated. 1
Enabled 1
Not selected 1
Selected 2
Not selected 1
Selected 2
8 DC inputs 1
12 DC inputs 2
16 DC inputs 3
20 DC inputs 4
No. Name/Value Description Def/
FbEq16/32
To Next Page
Loading...
Need help?
General