ABB PVS980-58 - System Info; Standard DI, RO; Standard DIO, FI, FO

Parameters 63
104.19 4th latest warning Event code of the fourth previously cleared warning. - /Data
104.20 5th latest warning Event code of the fifth previously cleared warning. - /Data
107 System info
Inverter hardware and firmware information.
All parameters in this group are read-only.
107.03 Rating id Shows inverter rating ID. - / Real
107.04 Firmware name Shows firmware name. - / Data
107.05 Firmware ver Shows firmware version - / Data
107.10 Safety critical hash Shows 32-bit hash code computed from the safety
critical source code.
0x0000/ Data
0x0000...0xffff 32-bit hash code -
107.17 PLC SW version Shows PLC software version number. - / Data
110 Standard DI, RO
Configuration of digital inputs and relay outputs.
110.02 DI delayed status Shows status of digital inputs DIIL (bit 15) and DI1...DI8
(bits 0...7).
Note: This word is updated only after the
activation/deactivation delay.
This parameter is read-only.
0b0000/
Bit list
b0: DI1 (Start/Stop) Delayed status of digital input 1.
b1: DI2 (Fast power off) Delayed status of digital input 2.
b2: DI3 (DC grounding
status)
Delayed status of digital input 3.
b3: DI4 (24 V buffer
active status)
Delayed status of digital input 4.
b4: DI5 (M1 aux power
protection status)
Delayed status of digital input 5.
b5: DI6 Delayed status of digital input 6.
b6 … b14 Reserved
b15: DIIL Delayed status of the DIIL input.
110.21 RO status Shows status of relay outputs. Bit 0 corresponds to
RO1.
This parameter is read-only.
0b0000/ Bit
list
b0 RO1 Status of relay output 1.
b1 RO2 Status of relay output 2.
b2 RO3 Status of relay output 3.
b3 … b15 Reserved
111 Standard DIO, FI,
FO
Configuration of digital input/outputs and frequency
input/outputs.
111.02 DIO delayed status Status word of digital inputs/outputs showing delayed
status after the activation/deactivation delay. Bit 0
corresponds to DIO1.
This parameter is read-only.
0b0000/ Bit
list
b0: DIO1 (M2 aux power
protection status)
Delayed status of digital input/output 1.
b1: DIO2 Delayed status of digital input/output 2.
b2 … b15 Reserved
No. Name/Value Description Def/
FbEq16/32