Tools 185
8
Tools
Contents of this chapter
This chapter describes the PC tools that can be used with the inverter. These tools may be
used in commissioning, troubleshooting and service activities. All the tools require a PC
running the Windows operating system. The software tools comprise the following two PC
software applications:
• Drive loader 2
• Drive composer entry (or Drive composer pro)
Drive loader 2
Drive loader 2 is a standalone tool for updating the firmware of the inverter. Drive loader 2
is available through the FIMER sales channels.
Drive composer entry
Drive composer entry is a basic startup and maintenance tool. With this tool, it is possible
to adjust and monitor parameters with a single inverter through a point-to-point connection.
Drive composer entry can be downloaded for free from the ABB website.
Drive composer pro
Drive composer pro is an enhanced version of the Drive composer entry tool. In addition to
all the features in the entry level version, its network tool supports multiple inverters and
enables fast monitoring of inverter signals. Drive composer pro is available through the
FIMER sales channels.
To Next Page
Loading...
