ABB PVS980-58 - Extension I;O Module 2; Extension I;O Module 3

Parameters 65
115 Extension I/O
module 2
Configuration of I/O extension module 2.
See also section Programmable I/O extensions.
Note: Contents of this parameter group vary according
to the selected I/O extension module type.
115.01 Module 2 type Selects option module 2 type. None/ List
None Inactive 0
FIO-01 FIO-01 1
FIO-11 FIO-11 2
FAIO-01 FIO-01 3
115.02 Module 2 location Selects option module 2 location Slot 1/ List
Not selected 0
Slot 1 1
Slot 2 2
Slot 3 3
115.03 Module 2 status Shows status of I/O extension module 2.
This parameter is read-only.
No option/
List
No option No module is detected in the specified slot. 0
FIO-01 An FIO-01 module is detected and is active. 1
FIO-11 An FIO-11 module is detected and is active. 5
FAIO-01 An FAIO-01 module is detected and is active. 7
116 Extension I/O
module 3
Configuration of I/O extension module 3.
See also section Programmable I/O extensions.
Note: The contents of the parameter group vary
according to the selected I/O extension module type.
116.01 Module 3 type Selects option module 3 type. None/ List
None Inactive. 0
FIO-01 FIO-01 1
FIO-11 FIO-11 2
FAIO-01 FIO-01 3
116.02 Module 3 location Selects option module 3 location. Slot 1/ List
Not selected 0
Slot 1 1
Slot 2 2
Slot 3 3
116.03 Module 3 status Shows status of I/O extension module 2. No option/
List
No option No module is detected in the specified slot. 0
FIO-01 An FIO-01 module is detected and is active. 1
FIO-11 An FIO-11 module is detected and is active. 5
FAIO-01 An FAIO-01 module is detected and is active. 7
No. Name/Value Description Def/
FbEq16/32