8 Introduction
Related documents
Refer to the inside of the front cover.
Contents of the manual
The manual includes the following chapters.
• Introduction (this chapter).
• Using the control panel (page 11) gives instructions for using the control panel.
• Program features (page 13) describes the firmware features of the inverter.
• Parameters (page 57) describes the parameters of the control program.
• Troubleshooting (page 153) lists all alarm and fault messages with possible causes
and corrective actions.
• Reduced run (page 179) describes about the reduced run function and how to use the
function.
• Communication interfaces (page 181) describes the menu structure of the inverter
user interface.
• Tools (page 185) describes the PC tools that can be used with the inverter.
• Using the PSL2 data logger (page 187) describes how to use the PSL2 data logger for
reading real time data from the inverter.
Disclaimers
Generic disclaimer
The manufacturer shall have no obligation hereunder with respect to any product which (i)
has been improperly repaired or altered; (ii) has been subjected to misuse, negligence or
accident; (iii) has been used in a manner contrary to the Manufacturer's instructions; or (iv)
has failed as a result of ordinary wear and tear. All material in this manual is subject to
change without a further notice. The manual is intended as a non-contractual document.
Cybersecurity disclaimer
This product is designed to be connected to and to communicate information and data via
a network interface. It is the sole responsibility of the customer to provide and continuously
ensure a secure connection between the product and customer network or any other
network (as the case may be). The customer shall establish and maintain any appropriate
measures (such as, but not limited to, the installation of firewalls, application of
authentication measures, encryption of data, installation of anti-virus programs and so on)
to protect the product, the network, its system and the interface against any kind of
security breaches, unauthorized access, interference, intrusion, leakage and/or theft of
data or information. FIMER and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
To Next Page
Loading...
Need help?
General