Using the PSL2 data logger 187
9
Using the PSL2 data logger
Contents of this chapter
This chapter describes how to upload the PSL2 data logger files and view the data with
Drive composer Pro PC tool. It also includes the list of PSL2 trigger faults.
For more information, see topics
• Uploading PSL2 data logger files on page 187
• Using the PSL2 data viewer (pro) on page 189
• PSL2 triggered faults on page 190
Uploading PSL2 data logger files
With BCU-x2 control unit, you can upload the PSL2 data logger files from the drive flash
memory to your PC local hard drive. The files contain real time data from the converter
modules that help in fault tracing and analysis.
Note: The files can be uploaded from the drive to local computer only. You cannot
read the contents or open the files. For further assistance contact FIMER
customer support.
To Next Page
Loading...
Need help?
General