Need help?Do you have a question about the ABB PVS800-57-0100kW-A and is the answer not in the manual?
General| Model | PVS800-57-0100kW-A |
|---|---|
| Type | Central Inverter |
| Rated AC Power | 100 kW |
| Max. DC Voltage | 1000 V |
| Output Voltage | 400 V |
| Frequency | 50/60 Hz |
| Cooling Method | Forced air cooling |
| Protection Level | IP54 |
| Operating Temperature Range | -25°C to +60°C |
Lists essential safety steps to follow before performing electrical installation or maintenance.
Details critical safety measures and warnings related to electrical hazards.
Provides instructions and requirements for proper grounding of the inverter system.
Covers broad safety guidelines and precautions for handling the inverter and its components.
Outlines safety precautions specifically for the inverter's start-up and operational phases.
Introduces the central inverter and describes its cabinet design and cooling system.
Presents the electrical schematic diagram for the R7i frame inverter.
Presents the electrical schematic diagram for the R8i frame inverter.
Presents the electrical schematic diagram for the 3xR8i frame inverter.
Details inverter functions for monitoring and reacting to power grid conditions.
Specifies the requirements for the inverter's installation location and floor conditions.
Describes methods for securely fastening the inverter cabinet to the floor.
Details the procedure for floor fastening using clamps.
Describes floor fastening methods utilizing the internal cabinet holes.
Guidance on choosing an appropriate transformer for the inverter system.
Guidelines for selecting appropriate DC and AC power cables based on system needs.
Methods for protecting the inverter and cables from short circuits and overheating.
Detailed procedures for connecting AC and DC power cables to the inverter.
Checks related to the electrical setup, including grounding and voltage.
Verifies correct power cable connections and their proper routing.
Crucial safety warnings and requirements for qualified personnel during start-up.
Pre-start checks for installation integrity and environmental conditions.
Confirms correct mechanical/electrical installation and acceptable ambient operating conditions.
Verifies assembly insulation integrity and correct DC input polarity and voltage.
Guidance on configuring inverter parameters prior to the initial start-up.
Step-by-step procedure for the initial local start-up of the inverter.
Performing DC voltage checks and operating control switches for initial start.
Instructions on how to initiate the inverter start sequence using the control panel.
Explains how to interpret warning and fault messages displayed on the control panel.
Detailed steps for safely removing and reinstalling R8i inverter modules.
Procedures for safely removing and reinstalling inverter modules from the cubicle.
Comprehensive table of inverter electrical and performance specifications.
Details on DC fuses required for various DC input configurations and options.
Electrical parameters and specifications related to the inverter's DC input.
To Next Page
