Introduction to the manual 21
Introduction to the manual
Contents of this chapter
This chapter describes the intended audience and contents of the manual. It contains a
flowchart of the steps in checking the delivery, installing and commissioning the inverter.
The flowchart refers to chapters/sections in this manual and other manuals.
Target audience
This manual is intended for people who plan the installation, install, commission, use and
service the inverter. Read the manual before you do work on the inverter. You are
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Contents of the manual
The chapters of the manual are briefly described below.
Safety instructions give safety instructions for the installation, commissioning, operation
and maintenance of the inverter.
Introduction to the manual introduces the manual.
Operation principle and hardware description describes the operation principle and
construction of the inverter in short.
Mechanical installation describes the mechanical installation procedure of the inverter.
Planning the electrical installation contains the instructions that you must obey when
selecting the cables, protections, cable routing and way of operation for the inverter
system.