ABB PVS980-58 User Manual

98 Parameters
153 FBA A data out
Selection of data to be transferred from fieldbus
controller to inverter through fieldbus adapter A.
Note: 32-bit values require two consecutive parameters.
Whenever a 32-bit value is selected in a data parameter,
the next parameter is automatically reserved.
153.01 FBA data out1 Parameters 153.01…153.12 select data to be
transferred from the fieldbus controller to the inverter
through fieldbus adapter A. Transfer speed can be set
with parameter 150.21 FBA A Timelevel sel.
None/ List
None None. 0
CW 16bit Virtual address for 16bit control word. 1
Ref1 16bit Virtual address for 16bit reference 1. 2
Ref2 16bit Virtual address for 16bit reference 2. 3
CW 32bit Virtual address for 32bit control word. 4
Ref1 32bit Virtual address for 32bit reference 1. 5
Ref2 32bit Virtual address for 32bit reference 2. 6
Other See Terms and abbreviations on page 57.
... ... ...
153.12 FBA data out12 See parameter 153.01 FBA data out1. None/ List
154 FBA B settings
Fieldbus adapter B configuration.
154.01 FBA type Shows the type of connected fieldbus adapter module.
0 = Fieldbus module is not found, or it is not properly
connected, or parameter 150.01 FBA A Enable is set to
Disable,
1 = FPBA-xx PROFIBUS-DP adapter module,
32 = FCAN-xx CANopen adapter module,
37 = FDNA-xx DeviceNet adapter module.
None/ List
None Module is not found or is not properly connected, or is
disabled with parameter 150.31 FBA B Enable.
0
Profibus-DP 1
CANopen 32
DeviceNet 37
Ethernet 128
PROFInet IO 132
EtherCAT 135
ETH Pwrlink 136
RS-485 comm 485
SERCOS 62944
LonWorks 21
ControlNet 101
CCLink 144
Macro 6144
J1939 61456
Fieldbus 61696
Sercos III 62947
No. Name/Value Description Def/
FbEq16/32

ABB PVS980-58 Specifications

General

Brand	ABB
Model	PVS980-58
Category	Inverter
Language	English