EasyManua.ls Logo

ABB PVI-3.0/3.6/4.2-TL-OUTD - Keyboard, Display, and LED Panel

ABB PVI-3.0/3.6/4.2-TL-OUTD
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 61 -
000410BG
6 - Instruments
Description of keyboard and LED Panel
Using the combination of keyboard keys, under the display, it is possible
to set values or scroll through the data items to view them. LED indica-
tors are located alongside the keyboard, indicating the operating state of
the inverter.
LED Description
POWER (GREEN) ON if the inverter is working correctly.
Flashes when checking the grid or if there is insufcient sunlight.
ALARM (YELLOW) The inverter has detected an anomaly; the anomaly is shown on the display.
GFI (RED) Ground fault on the DC side of the PV generator; the error is shown on the display.
The LEDs, in various multiple available combinations, can signal multiple conditions other
than the original single condition; see the various descriptions explained in the manual.
KEYS Description
ESC It is used to access the main menu, to go back to the previous menu or to go back to the
previous digit to be edited.
UP It is used to scroll up the menu options or to shift the numerical scale in ascending order.
DOWN It is used to scroll down the menu options or to shift the numerical scale in descending order.
ENTER It can be used to conrm an action, to access the submenu for the selected option (indicated
by the > symbol) or to switch to the next digit to be edited. By pressing and holding the key,
the cyclical display of the parameters can be:
Locked or Cyclical.
The Keys, in various multiple available combinations, allow you to access actions other than the
original single action; see the various descriptions explained in the manual.
Скачано с сайта интернет магазина https://axiomplus.com.ua/

Table of Contents

Related product manuals