ABB REB500 - Isolators; Current Transformers

1MRK 505 350-UEN Section 3
System Settings
Technical Manual 25
Distributed busbar protection REB500
3.2 Isolators
The “Overview” tab opens a dialog with a list of all the isolators in the single-line
diagram with their labels and bay labels. The isolators of a particular bay can be
viewed by activating the check box “Feeder filter” and selecting a bay from the list.
The label in the “Markings” field of the “Details” dialog can be edited.
Figure 3 Settings / Isolators - Details
3.3 Current transformers
The “Overview” tab opens a dialog with a list of all the current transformers in the
single-line diagram with their labels, bay labels, primary and secondary rated
currents.