ABB REB500 - Page 40

Section 3 1MRK 505 350-UEN
System Settings
32 Technical Manual
Distributed busbar protection REB500
Fig. 3.1 Settings / Time -Time zone correction
3.7.4.2 Daylight saving time
This menu permits the configuration of an automatic switching between standard
and summer time.
If the “Daylight saving time” (DST) mode is enabled the user can define the
moment of “Start” and “End” of the DST period. The DST settings are saved by
pressing the “OK” or “Apply” button.
Fig. 3.2 Daylight saving time settings