1MRS750527-MUM
REF 54_
111
Feeder Terminal
Technical Reference Manual, General
8.4.2. Configuration, setting and SA system tools
The following tool versions are needed to support the new functions and features of
the Release 2.5 revisions of the REF 54_:
• CAP 505 Relay Product Engineering Tools; CAP 505 v. 2.2.0-1
• CAP 501 Relay Setting Tools; CAP 501 v. 2.2.0-1
• LNT 505 LON Network Tool; LNT 505 v. 1.1.1-1
• LIB 510 Library for MicroSCADA v. 8.4.4; LIB 510 v. 4.0.4-2
8.5. Release 3.0
8.5.1. Changes and additions to earlier released revisions
General
• Binary time synchronization
Protocols & communication
• DNP 3.0
• Modbus
Tools
• Protocol Mapping Tool integrated in CAP 505
8.5.2. Configuration, setting and SA system tools
The following tool versions are needed to support the new functions and features of
Release 3.0 revisions of REF 54_:
• CAP 505 Relay Product Engineering Tools; CAP 505 v. 2.3.0-1
• CAP 501 Relay Setting Tools; CAP 501 v. 2.3.0-1
• LNT 505 LON Network Tool; LNT 505 v. 1.1.1-1
• Medium Voltage Process Application Library LIB 510 v. 4.0.4-4
8.6. Release 3.5
8.6.1. Changes and additions to earlier released revisions
General
• HMI improvements:
• Selectable Default view
• Direct move from Event view to the Recorded data of a selected event
• Delayed CB closing
• Selectable function block naming (ABB/ANSI/IEC)
• New language versions:
• English - Russian
• English - Czech
• Test mode for RTD1 I/O
To Next Page
Loading...
Need help?
General
