Feeder Terminal REF 542plus
1MRS756269
Ordering (cont´d)
22
Static I/O: 14 inputs, 7 power outputs, 2
signal outputs and 1 watchdog output.
BIO 3: 14 inputs, 6 power outputs, 2 signal
outputs and 1 watchdog output.
7 6 B 6 A 3 3 3 03 6 S Z 4 1
Binary IO Slot 2: Version of binary I/O, the
possible selection depends on the selected
version of binary I/O 1. If no binary I/O is
needed, the slot can be left empty. The corre-
sponding code can be taken from the table 12.
7 6 B 6 A 3 3 3 03 6 S Z 4 1
Binary IO Slot 3: Version of binary I/O, the
possible selection depends on theselected ver-
sion of binary I/O 1. If no binary I/O is
needed, the slot can be leftempty. The corre-
sponding code can be taken from the table 12.
7 6 B 6 A 33 3 03 6 S Z 4 1
Analog Input XX: There are three different
types of analog input version which canbe
selected as shown in the following tables:
D 750132/805 Binary I/O3 -
80-250 V/ 72 V DC,
standard
Standard version with 72 V DC treshold value for
application in auxiliary circuit with DC voltage range
80 -250 V DC
E 750132/806 Binary I/O3 -
80-250 V/ 72 V DC,
with static channel
As no. D + one static output channel for energy
metering
F 750132/807 Binary I/O3 -
80-250 V/ 143 V DC,
standard
Standard version with 143 V DC treshold value for
application in auxiliary circuit with DC voltage range
80 -250 V DC
G 750132/808 Binary I/O3 -
80-250 V/ 143 V DC,
with static channel
As no. F + one static output channel for energy
metering
Table 12: Binary I/O modules
Number Code Name Description
Table 13: Sensors
Number Code Description
01 750138/803 Analog Input sensors version
Table 14: Mix of sensors and transformers
Number Code Description
10 750170/843 3 sensors + 3 sensors + 1 CT/0.2 A + 1 VT
11 750170/846 3 sensors + 3 VT + 1 CT/0.2 A + 1 VT
12 750170/847 3 sensors + 3 sensors + 1 CT
13 750170/851 3 sensors + 3 sensors + 1 CT+ 1 VT
14 750170/852 3 sensors + 3 sensors + 1 CT/0.2 A
15 750170/853 3 sensors + 3 sensors + 1 VT + 1 VT
16 750170/854 3 sensors + 3 CT + 1 CT/0.2 A + 1 VT
17 750170/855 3 sensors + 3 CT + 1 CT/0.2 A + 1 CT/0.2 A