ABB REF 542plus - Page 26

Feeder Terminal REF 542plus
1MRS756269
Ordering (cont´d)
26
Please use the key below to generate the type
designation. The code numbers in the follow-
ing example are not complete and should be
taken from the corresponding tables above.
Fig. 14 The key for generating the type designation
7 6 B 6 A 3 3 3 03 6 S Z 4 1
Software
SW level:
1 = Base
2 = High
3 = Basic low
(For more information, see Table 20)
Connection cable
N = None
1 = 1.8 m cable
2 = 2.5 m cable
(For more information, see Table 19)
HMI
N = None
A = HMI V5 for IEC, 48 - 110 V DC
B = HMI V5 for IEC, 110 - 220 V DC
C = HMI V5 for IEC, 110 - 220 V DC, with cover
(For more information, see Table 18)
Enclosure
S = Normal
W = Wide
(For more information, see Table 17)
Communication
N = No communication
1 = Modbus/SPA RS485
2 = Modbus/SPA glass fibre, ST connector
(For more information, see Table 16)
Analog input
01 = Sensors
10-17 = Mixed sensors and transformers
30-43 = Mixed transformers
(For more information, see Tables 13-15)
Binary I/O 1
1 = Static I/O
2 = Static I/O without check
3 = Binary I/O vers. 3
(For more information, see Table 12)
Binary I/O 2 and Binary I/O 3
(For more information, see page 22)
Analog I/O modules
N = No I/O module
A = Analog input module 0(4) - 20 mA
B = Analog output module 4 - 20 mA
(For more information, see Table 11)
Power supply
1 = 110 V DC
2 = 220 V DC
3 = 48 - 220 V DC
6 = 48 - 220 V DC, DNV/marine
(For more information, see Table 10)
Main board
B = Basic
S = Standard
(For more information, see Table 9)
Applications
6 = REF 542plus
A = REF 542plus, DNV/marine
B = REF 542plus, ATEX-1
C = REF 542plus, ATEX-1 + DNV/marine
(For more information, see Table 8)
Feeder terminal family code
7 = REF 542plus
(For more information, see Table 7)
A060520-b