GUID-85906713-A734-4EAC-AF35-0E40BA55AA72 V1 EN
Figure 18: Supervision
3.2.8 Measurement and analog recording functions
The measured quantities in this configuration are:
• Current
• Voltage
• Current sequence component
• Voltage sequence component
• Residual current
• Residual voltage
• Power
• Frequency
• Energy
The measured quantities can be viewed in the measurement menu on the LHMI.
All analog input channels are connected to the analog disturbance recorder. When any
of these analog values violate the upper or lower threshold limits, the recorder unit is
triggered which in turn will record all the signals connected to the recorder.
1MRS757582 C Section 3
REG630 variants
REG630 45
Application Manual
To Next Page
Loading...
