Section 1 Introduction
1.1 This manual
The application manual contains descriptions of preconfigurations. The manual can
be used as a reference for configuring control, protection, measurement, recording and
LED functions. The manual can also be used when creating configurations according
to specific application requirements.
1.2 Intended audience
This manual addresses the protection and control engineer responsible for planning,
pre-engineering and engineering.
The protection and control engineer must be experienced in electrical power
engineering and have knowledge of related technology, such as protection schemes
and principles.
1MRS757582 C Section 1
Introduction
REG630 3
Application Manual
To Next Page
Loading...
